Rice-lake Go-Between, Data Capture and Storage Uživatelský manuál stáhnout pdf

December 2014 154051 - Rev A

Go-Between

™

Installation and Operation

The Go-Between device must be correctly wired to an external power source (such as an indicator) and a serial

port before it will capture data.



Important

Ensure the source’s serial port is configured to 9600 baud rate, 8 bits, no parity, and 1 stop bit.

Installing the Go-Between

This document illustrates the Go-Between being installed on an indicator; however, virtually any device with a

serial output and print data string will function with the unit.

W ARNING

Electric Shock Hazard



Before opening the device enclosure, ensure the power cord is disconnected from the power outlet.

Using a Flash Drive

The Go-Between device captures data and stores it on a USB flash drive. Make sure the drive is formatted in the

FAT file system and does not exceed 8 GB. Connect the flash drive to the Go-Between’s USB port.

Capturing Data

Once properly installed, the Go-Between device will automatically capture data when the source’s print command is

executed. Make sure the source device’s print format is configured to output the data that will be captured.

Transferring Data to PC (desktop model)

Data on the Go-Between device is stored in a .txt file.

Use the following steps to transfer data to your PC:

1. On the Go-Between, press

Save.

2. Disconnect the flash drive from the Go-Betwe

en’s USB port.

3. Connect the flash drive to the PC’s USB port.

4. Navigate to the flash drive and open the .txt file to vi

ew its contents. It can also be imported into

Microsoft Excel

or other spreadsheet software.

5-GND3-TX2-RX

5 VDC

Connection Power Supply: Cable

Enclosure: DB-9 Male Connector

Connection: Transmit from product outputtin

g data to Receive on Go-Between

Ground from product to Ground on G0-Between

Excel is a trademark of Microsoft Corporation.

1 2 3 4

Shrnutí obsahu

Strany 1 - Installation and Operation

December 2014 154051 - Rev AGo-Between™ Installation and OperationThe Go-Between device must be correctly wired to an external power source (such as a

Strany 2

2 Go-Between Installation and OperationTransferring Data to PC (Industrial Enclosure)Data on the Go-Between device is stored in a.txt file. To transfe

Strany 3 - Go-Between Troubleshooting

Go-Between Installation and Operation 3Power Source Coming From an External Power SupplyFor devices that are powered by an external power source use T

Strany 4

4 Go-Between Installation and Operation230 W. Coleman St. • Rice Lake, WI 54868 • USAU.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 71

Komentáře k této Příručce

Žádné komentáře

Rice-lake Go-Between, Data Capture and Storage Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Váhy Rice-lake Go-Between, Data Capture and Storage. Rice Lake Go-Between, Data Capture and Storage User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Váhy Rice-lake Go-Between, Data Capture and Storage