Rice-lake DWM-IV Weighmeter Series 9 Setup Manual Uživatelský manuál stáhnout pdf (Strana 24)

Customizing Print Format (Optional)

Ø Press [

G/N

] key and [

Select/Enter

] key together, Audit Trail will be displayed,

when released the display will show [

P 0

] and the 7

LED will flash, which

means you need to enter the numeric value password to access the setup mode.

Ø Key in the password [

] [

] and press [

Enter

], the display will show [

]

Ø Press [Shift] then [0], [PRT FMT] will be displayed, then [P1 CUST] will be

displayed.

Here you can use the [

] key or [

G/N

] key to browse the following three menus,

(1) [

P1 CUST

] Ø For Custom Print Formatting.

(2) [

P2 CONT

] Ø For Custom Formatting for Continuous Output.

(3) [

FMT END

] Ø to end the Custom Formatting and return to normal weighing mode.

select the menu by pressing the Enter key and continue the setting.

Ø The numeric characters (0, 1, … , 9), all alphabets (A, B, … , Z) and some other

characters are already assigned to the Group-B keys (Ref: Key Explanation page as

describe earlier) so these characters can be keyed in directly from Group-B keys.

(Example: for “1” Ø press [

] key,

for “A” Ø press [

Shift

] then press [

] key,

for “B” Ø press [

Shift

] then press [

] and press [

Shift

] key.

To confirm character entry, press [

Enter

] key after selecting the input

character).

There will be a blinking LED just below one of the 7-segment display digits

which shows the active digit position or character insertion position.

Ø The characters or text to be printed out should be place d inside the double

quotation marks.

(e.g. “FlexWeigh” will print out as FlexWeigh )

Ø For Control characters or some other characters which cannot be used by the

front panel keys are to be keyed in by using the following format:

“

\xxx

” (where:

xxx

is the ASCII code or extended ASCII code (0~255) in

decimal value of the character code to be printed)

Following Command Codes are provided

(1) “

” = Carriage Return

(2) “

” = Line Feed

(3) “

” = End of line (CR+LF) (e.g. “\E” = “\R\N” will be printed)

(4) “

\Lx

” = “x” Line Feeds (e.g. “\L3” = “\N\N\N” = 3 Line Feeds will be printed)

(5) “\Sx” = “x” Spaces (e.g. “\S4” = 4 spaces will be printed)

(6) “

\CX.Y

” = Repeat printing a character X for a total of Y characters, X can be

“\xxx” form (e.g. “\C=.16” = Prints “=” for 16 characters or “\C\42.16 = Prints “*”

for 16 characters)

Weight Format Command (WX.Y)

X = Weight Type (0 = Net, 1 = Gross, 2 = Tare)

= Field Width (Includes “.” if any)

Ø Weight Unit Command (U)

Appends the current unit of measurement to the printed weight and optional tare

entry flag.

(1) “^kg^^^” For Pushbutton Tare, Gross or Net Weight. (kg = current unit, ^

= space)

(2) “^kg(K)” For Keyboard Tare or Recall Tare Weight.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 34 35

Komentáře k této Příručce

Žádné komentáře

Rice-lake DWM-IV Weighmeter Series 9 Setup Manual Uživatelský manuál Strana 24

Komentáře k této Příručce

Související produkty a manuály pro Váhy Rice-lake DWM-IV Weighmeter Series 9 Setup Manual