Rice-lake 880 Performance Series Indicator/Controller Techni Uživatelský manuál stáhnout pdf (Strana 27)

Backplate

Power Supply Board

Cable, Power

to CPU

CPU Board

Screws connecting power

supply board to backplate

Screws connecting CPU

board to backplate

Installation 21

Figure 2-14. Boards Removed from Enclosure

7. Place the new board in position and secure using the existing screws.

8. Connect cable to boards.

9. Slide backplate with boards into enclosure, ensure that each board is seat

ed correctly in the grooves of the

enclosure.

Ensure boards are

seated properly in the

grooves of the

enclosure.

Corner screws

DIN Rail Clip

Note

Ensure the enclosure is in the upright position, otherwise the connector for the display will not align with the

front cutout. Enclosure brackets should be

at the bottom.

Figure 2-15. Boards Installed in Controller Assembly Enclosure

10. Secure backplate to enclosure using the four existing corner screws.

11. Reinstall controller assembly (see Section 2.2 steps 4-6).

12. Reconnect all connectors to the backplate. See Figure 2-12 for connector locations.

Note

If option card is installed, see the option card addendum for proper installation of the module.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 119 120

Žádné komentáře

Rice-lake 880 Performance Series Indicator/Controller Techni Uživatelský manuál Strana 27