Rice-lake 880 Performance Series Indicator/Controller Techni Uživatelský manuál Strana 54
- Strana / 120
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
48 880 Technical/Service Manual
3.2.12 Print Format Menu
PFORMT
....
....
SETUP
....
....
GFMT
FMT
COM
ETH-S
USBCOM
PORT
format
NFMT SPFMTACCFMT HDRFMT
format
USBMEM
ETH-C
OFF
Print Destination Ports
COM RS-232/485 port – J3 (Section 2.5.3 on page 17)
USBCOM USB Device Port – J4 (Section 2.5.4 on page 17)
ETH-S Ethernet Server – J6 (Section 9.1 on page 87)
ETH-C Ethernet Client – J6 (Section 9.1 on page 87)
USBMEM Print to file on USB flash drive (Section 9.2.2 on
page 92)
Figure 3-17. Print Format Menu Structure
Table 3-14. Print Format Menu Parameters
PFORMAT Menu
Parameter Choices Description
GFMT Alphanumeric, Max Length: 1000
FMT Normal mode, no tare in system
GROSS<G><NL2><TD><NL>
PORT The communications port the print
data will be sent to: COM, USBCOM, ETH-S, ETH-C,
USBMEM, OFF.
NFMT Alphanumeric, Max Length: 1000
FMT Normal mode, tare in system.
GROSS<G><NL>TARE<SP><T><NL>NET<SP2><N><NL2><TD><
NL>
PORT The communications port the print
data will be sent to: COM, USBCOM, ETH-S, ETH-C,
USBMEM, OFF.
ACCFMT Alphanumeric, Max Length: 1000
FMT Accumulator enabled and display
ed, or setpoint print operation with PSHACC=ON.
ACCUM<A><NL><DA><TI><NL>
PORT The communications port the print data will be sent to: COM, USBCOM, ETH-S, ETH-C,
USBMEM, OFF.
SPFMT Alphanumeric, Max Length: 1000
FMT Setpoint print operation with PSHPRNT=ON.
<SCV><SP><SPM><NL>
PORT The communications port the print
data will be sent to: COM, USBCOM, ETH-S, ETH-C,
USBMEM, OFF.
HDRFMT Must be inserted into other print format. Alp
hanumeric, maximum length 300.
COMPANY NAME<NL>STREET ADDRES
S<NL>CITY, ST ZIP<NL2>
Note
For all PORT choices, if the COM port is set to TYPE = RS485, the port will not perform a demand print.
See Section 10.6.3.
- 880 Performance Series 1
- Technical/Service 1
- Contents 3
- About This Manual 7
- 1.0 Introduction 7
- General Safety 8
- 1.2 Operating Modes 9
- 1.3 Front Panel Display 9
- Center of Zero LED 10
- Standstill LED 10
- 1.4 Indicator Operations 11
- 1.4.7 Print Ticket 12
- 1.4.8 Front Panel Setup 12
- 1.4.10 Setpoints 13
- Turn Setpoint On or Off 13
- 1.4.11 Set Time and Date 14
- 1.4.12 Display Accumulator 14
- 1.4.13 Clear the Accumulator 14
- 1.4.14 Display Tare 15
- 2.0 Installation 16
- 2.2 Panel Mount Installation 17
- Important 18
- J1 J2 J3 J4 J5 J6 19
- 2.4 Display Board Replacement 22
- 2.5 Cable Connections 22
- 2.6 USB Host 24
- 2.7 Ethernet Communications 24
- 2.8 CPU Board 25
- 2.10 Board Replacement 26
- 2.11 Digital I/O 28
- 2.12 Legal for Trade Sealing 28
- 2.13 Option Cards 29
- 2.14 Battery Replacement 29
- 2.15 Replacement Parts 30
- 3.1.3 User Setup Menu 33
- 0 0 0 0 0 0 34
- 3.2.1 Audit Menu 35
- 3.2.2 Setup Menu 36
- 37
- SCALE Menu 38
- 3.2.4 FORMAT Menu 40
- FORMAT Menu 41
- 3.2.5 Calibration Menu 42
- FEATUR Menu 44
- COM Menu 50
- ETHERNET Menu 52
- 3.2.11 USB Host 53
- 3.2.12 Print Format Menu 54
- Configuration 51 57
- SETPTS Menu 58
- 4.0 Calibration 63
- 4.1 Front Panel Calibration 64
- 4.1.2 Rezero 65
- 4.5 Gravity Compensation 66
- 4.6 EDP Command Calibration 67
- 4.7 Revolution 67
- Calibration 67
- 5.0 Using Revolution 68
- 5.2 Configuration 69
- 5.4 Revolution Help 70
- 6.0 EDP Commands 71
- 6.1.2 Reporting Commands 72
- Scales Menu 73
- Format Menu 73
- Calibration Menu 74
- Ports COM Menu 74
- Ports – Field Bus Menu 75
- Ports – Ethernet Menu 75
- Ports – USBCOM Menu 76
- Stream Tokens Menu 76
- Feature Menu 76
- Regulatory Menu 77
- Time and Date 77
- Passwords Menu 77
- Keypad Lock Menu 77
- Setpoints Menu 78
- Print Format Menu 80
- Analog Out Menu 80
- 6.1.5 Normal Mode Commands 81
- Digital I/O Control Menu 82
- 6.1.6 ERROR Commands Output 82
- 7.0 Print Formatting 83
- 7.2 Default Print Formats 84
- 7.3 Customizing Print Formats 85
- 7.3.3 Using Revolution 86
- 8.0 Setpoints 87
- 8.2 Batch Operations 89
- 8.3 Batching Examples 91
- Example 2 92
- 9.0 Ethernet and USB 93
- Ethernet and USB 89 95
- Using Revolution 96
- with Ethernet 96
- 9.2 USB Host 97
- 9.2.2 USB Memory storage 98
- Saving Configuration 98
- Loading Configuration 98
- 10.0 Appendix 100
- 10.3 ERROR Commands Output 101
- 10.4 Status Messages 102
- 10.6 Data Formats 103
- <STX> 104
- ONTROL-B>AXG#1<CR> 105
- 10.8.1 Toledo 8142 Indicator 108
- 10.8.2 Cardinal 738 Indicator 109
- 10.9 ASCII Character Chart 111
- 10.10 Digital Filtering 113
- (Section 4.0) 114
- 10.12 Specifications 115
- 880 Limited Warranty 116
- For More Information 117
- PN 158387 Rev C 120
Související produkty a manuály pro Váhy Rice-lake 880 Performance Series Indicator/Controller Techni
Váhy Rice-lake 920i Grain Program Uživatelský manuál
(14 stránky)
(14 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.078 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce