Rice-lake 880 Performance Series Indicator/Controller Techni Uživatelský manuál Strana 84
- Strana / 120
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
78 880 Technical/Service Manual
7.2 Default Print Formats
Table 7-2 shows the default print formats for the 880 and lists the conditions under which each print format is used.
The
HDRFMT format is used to specify header information that can be used by the other print formats. The contents
of the
HDRFMT format can be inserted into any other print format using the <H1> formatting command.
Table 7-2. Default Print Formats
Format Default Format String Used When
GFMT | FMT GROSS<G><NL2><TD><NL> Normal mode, no tare in system
GFMT | PORT Defines the communication port that the format wi
ll be sent to.
NFMT | FMT GROSS<G><NL>TARE<SP><T><NL>NET
<SP2><N><NL2><TD><NL>
Normal mode, tare in system
NFMT | PORT Defines the communication port that the format wi
ll be sent to.
ACCFMT | FMT ACCUM<A><NL><DA> <TI><NL> Accumulator enabled and displayed, or
setpoint print operation
with PSHACCM=ON
ACCFMT | PORT Defines the communication port that the format wi
ll be sent to.
SPFMT | FMT <SCV><SP><SPM><NL> Setpoint push print operation (PSHPRNT=ON or WAITSS)
SPFMT | PORT Defines the communication port that the format wi
ll be sent to.
Note
In OIML and CANADA modes, the letters PT (preset tare) are automatically inserted after the printed tare
weight.
If the COM port is set to TYPE = RS485, the port
will not perform a demand print. See Section 10.6.3.
<CR> Carriage return character
<LF> Line feed character
Note
1. Gross, net, and tare weights are 8 digits in length, including sign and decimal point, followed by a space and a one-
to five-digit units identifier. Total field length with units identifier is 10-14 characters. Depending on what units are
configured, the units identifier will be lb, kg, oz, tn, t, or g.
2. Gross, net, tare, and accumulator weights can be printed in any
configured weight units by adding the following
modifiers to the gross, net, tare, and accumulator weight commands: /P (primary units), /D (displayed units), /S
(secondary units), /T (tertiary units). If not specified, the current displayed units (/D) is assumed. Example: To format
a ticket to show net weight in secondary units, use the following command: <N/S>.
3. Unit ID and consecutive number (CN) fields are 1–6 characters in length, as required.
4. If nn is not specified, 1 is assumed. Value must be in the range 1–99.
5. After receiving an SU command, the indicator sends unformatted data
until the next SU command is received.
Unformatted data omits decimal points, leading and trailing characters.
Command Description
Ticket Format
GFMT/NFMT/
ACCFMT
SPFMT
Table 7-1. Print Format Commands (Continued)
- 880 Performance Series 1
- Technical/Service 1
- Contents 3
- About This Manual 7
- 1.0 Introduction 7
- General Safety 8
- 1.2 Operating Modes 9
- 1.3 Front Panel Display 9
- Center of Zero LED 10
- Standstill LED 10
- 1.4 Indicator Operations 11
- 1.4.7 Print Ticket 12
- 1.4.8 Front Panel Setup 12
- 1.4.10 Setpoints 13
- Turn Setpoint On or Off 13
- 1.4.11 Set Time and Date 14
- 1.4.12 Display Accumulator 14
- 1.4.13 Clear the Accumulator 14
- 1.4.14 Display Tare 15
- 2.0 Installation 16
- 2.2 Panel Mount Installation 17
- Important 18
- J1 J2 J3 J4 J5 J6 19
- 2.4 Display Board Replacement 22
- 2.5 Cable Connections 22
- 2.6 USB Host 24
- 2.7 Ethernet Communications 24
- 2.8 CPU Board 25
- 2.10 Board Replacement 26
- 2.11 Digital I/O 28
- 2.12 Legal for Trade Sealing 28
- 2.13 Option Cards 29
- 2.14 Battery Replacement 29
- 2.15 Replacement Parts 30
- 3.1.3 User Setup Menu 33
- 0 0 0 0 0 0 34
- 3.2.1 Audit Menu 35
- 3.2.2 Setup Menu 36
- 37
- SCALE Menu 38
- 3.2.4 FORMAT Menu 40
- FORMAT Menu 41
- 3.2.5 Calibration Menu 42
- FEATUR Menu 44
- COM Menu 50
- ETHERNET Menu 52
- 3.2.11 USB Host 53
- 3.2.12 Print Format Menu 54
- Configuration 51 57
- SETPTS Menu 58
- 4.0 Calibration 63
- 4.1 Front Panel Calibration 64
- 4.1.2 Rezero 65
- 4.5 Gravity Compensation 66
- 4.6 EDP Command Calibration 67
- 4.7 Revolution 67
- Calibration 67
- 5.0 Using Revolution 68
- 5.2 Configuration 69
- 5.4 Revolution Help 70
- 6.0 EDP Commands 71
- 6.1.2 Reporting Commands 72
- Scales Menu 73
- Format Menu 73
- Calibration Menu 74
- Ports COM Menu 74
- Ports – Field Bus Menu 75
- Ports – Ethernet Menu 75
- Ports – USBCOM Menu 76
- Stream Tokens Menu 76
- Feature Menu 76
- Regulatory Menu 77
- Time and Date 77
- Passwords Menu 77
- Keypad Lock Menu 77
- Setpoints Menu 78
- Print Format Menu 80
- Analog Out Menu 80
- 6.1.5 Normal Mode Commands 81
- Digital I/O Control Menu 82
- 6.1.6 ERROR Commands Output 82
- 7.0 Print Formatting 83
- 7.2 Default Print Formats 84
- 7.3 Customizing Print Formats 85
- 7.3.3 Using Revolution 86
- 8.0 Setpoints 87
- 8.2 Batch Operations 89
- 8.3 Batching Examples 91
- Example 2 92
- 9.0 Ethernet and USB 93
- Ethernet and USB 89 95
- Using Revolution 96
- with Ethernet 96
- 9.2 USB Host 97
- 9.2.2 USB Memory storage 98
- Saving Configuration 98
- Loading Configuration 98
- 10.0 Appendix 100
- 10.3 ERROR Commands Output 101
- 10.4 Status Messages 102
- 10.6 Data Formats 103
- <STX> 104
- ONTROL-B>AXG#1<CR> 105
- 10.8.1 Toledo 8142 Indicator 108
- 10.8.2 Cardinal 738 Indicator 109
- 10.9 ASCII Character Chart 111
- 10.10 Digital Filtering 113
- (Section 4.0) 114
- 10.12 Specifications 115
- 880 Limited Warranty 116
- For More Information 117
- PN 158387 Rev C 120
Související produkty a manuály pro Váhy Rice-lake 880 Performance Series Indicator/Controller Techni
Váhy Rice-lake 920i Grain Program Uživatelský manuál
(14 stránky)
(14 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce